Colorimetric water test kits

Colorimetric water test kits give a visual colour-change reading for pH and dissolved parameters without a photometer. Water treatment plants, aquaculture sites, environmental laboratories and teaching labs use them for rapid on-site checks and routine water analysis.

This section holds 957 Macherey-Nagel listings, including universal indicator paper in pH 1–11 and pH 1–14 ranges, supplied as reels, refill packs and booklets. A colour chart on the pack turns each reading into a value, so no instrument or calibration is needed, which makes these kits practical for field sampling as well as the bench.

When choosing a colorimetric test kit, match the measuring range to the sample and consider whether a reel or booklet format suits your workflow better. For a specific parameter or pack size, ask Lancetech Limited for a quotation.

Filters (2 active)

FiltersReset all

Colorimetric water test kits

Storage Temperature

Hazardous material

Shelf life (from production)

Parameter

For method

NANOCONTROL Interlaboratory test consisting of interlaboratory test solution A and interlaboratory test solution B for the determination of COD, NO3-N, NH4-N and total-P

NANOCONTROL Interlaboratory trial metals consisting of interlaboratory test solution A, B and C for the determination of Al, Cd, Cr, Cu, Fe, Ni, Pb and Zn

NANOCONTROL Multistandard Sewage Outflow 2 for analytical control of low concentrations

NANOCONTROL Multistandard Sewage Outflow 1 for analytical control of low concentrations

NANOCONTROL Multistandard "Sewage inflow" for analytical control of medium concentrations

NANOCONTROL Multistandard "Seepage" for analytical control of high concentrations

NANOCONTROL Multistandard "Metals 1" for analytical control

NANOCONTROL Multistandard "Metals 2" for analytical control

NANOCONTROL Multistandard "Drinking water" for analytical control

NANOCONTROL Standard AOX 2x5 mL standard solution sufficient for 20 determinations

NANOCONTROL Standard Chlorine 2x30 mL standard solution and additional reagents sufficient for 30 determinations

NANOCONTROL Standard COD 60 30 mL standard solution in glass bottle, sufficient for 15 determinations

NANOCONTROL Standard Chromate 2x30 mL standard solution/ 30 mL standard addition 100+ sufficient for 15 determinations

NANOCONTROL Standard COD 160 30 mL standard solution in glass bottle sufficient for 15 determinations

NANOCONTROL Standard COD 15000 30 mL standard solution in glass bottle sufficient for min. 30 determinations

NANOCONTROL Standard COD 1500 30 mL standard solution in glass bottle sufficient for 15 determinations

NANOCONTROL Standard Sulfat LR 200 65 mL standard solution in glass bottle, sufficient for 15 determinations

NANOCONTROL Standard Nitrite 2x30 mL standard solution/ 30 mL standard addition 100+ sufficient for 15 determinations

NANOCONTROL NANOTURB turbidity standard with 4 tubes (1.4,100.400 NTU) for the nephelometric turbidity calibration of NANOCOLOR spectrophtometers

NANOCONTROL NANOCHECK 2.0 test standards to check the photometric accuracy

NANOCONTROL Standard TOC 30 30 mL standard solution in glass bottle, sufficient for 15 determinations

NANOCONTROL Standard ortho-Phosphate 2x30 mL standard solution/ 30 mL standard addition 100+ sufficient for 15 determinations

NANOCONTROL Standard TOC 300 30 mL standard solution in glass bottle, sufficient for 15 determinations

NANOCOLOR Standard BOD5 10 tubes with standard (lyophilised) sufficient for 10 determinations

New products and price changes, once a month