Jeio Tech RW3-0525P, 5 Litre Refrigerating & Heating Bath Circulator

Jeio Tech RW3-0525P, 5 Litre Refrigerating & Heating Bath Circulator for life-science, pharmaceutical and industrial laboratories.

Bath volume (L / cu ft)	5 / 0.2
Cooling capacity (bath fluid: ethanol) – at -20℃ (-4℉) , W	80
Cooling capacity (bath fluid: ethanol) – at +20℃ (+68℉) , W	320
Cooling capacity (bath fluid: ethanol) – at 0℃ (+32℉) , W	230
Dimension – Bath opening / depth (W×L, D) (mm / inch)	150×99, 160/ 5.9×3.9, 6.3
Dimension – Exterior (W×L×H) (mm / inch)	308x480x733/ 12.1x18.9x28.9
Dimension – Net weight (kg / lbs)	38 / 83.8
Electrical requirements (230V, 60Hz)	11A
Manufacturer Part Number	AAH57645K
Pump (bath fluid: water) – Max. flow rate	7.4 gallons / minute (28 liters / minute)
Pump (bath fluid: water) – Max. pressure	5.9 PSI (406.8 millibar)
Supplied As	1
Temperature – Temperature stability (±℃ / ℉)	0.05 / 0.09
Temperature – Working temperature range (℃ / ℉)	-25 to 150 / -13 to 302
Manufacturer	JeioTech
MPN	AAH57645K
Item number	AAH57645K

The Jeio Tech RW3-0525P Refrigerating & Heating Bath Circulator, with a 5 litre capacity, provides rapid heating and cooling throughout its entire temperature range.

The Jeio Tech RW3-0525P Refrigerating & Heating Bath Circulator, with a 5 litre capacity, provides rapid heating and cooling throughout its entire temperature range. Its seamless, round-cornered stainless steel tank with an accessible drain valve can be easily cleaned and ensure stability. With an optimum refrigeration system, samples and applications can be cooled quickly. Intelligent program control: 10 programs available for temperature ramp up and dwell control. 10 steps per a program and 99 hours 59 minutes per a step. Stored programs are easily linkable. Programs can be repeated up to 99 cycles. Pre-heating and heating time are settable before program starts We also have a wide range of accessories available.

Features

Performance Microprocessor PID control Intelligent program control Three point temperature calibration / automatic tuning / automatic run Suitable for both internal and external bath environments due to reduced turbulence by using five-speed adjustable pump and built-in cooling coil Convenience Intuitive touch screen LCD controller with easy icons and logical menus Dual wait On / Off timer modes (1min to 99hr 59min) Digital input and output control function for interlocking external devices RS-232 interface for external control and data collection High quality, corrosion resistant, 304 grade stainless steel bath with rounded corners which is easy to clean, with front access drain valve Quick release front grill and detachable condenser air-filter for easy maintenance Use of CFC-free refrigerant (R-507, R-404A) and a double service valve for leak prevention Built-in casters and side handles for easy transport and installation Safety Isolated design of agitator, heater and sensor by a baffle plate, minimising the turbulence in the bath fluid and also protecting users and samples against direct contact Complete safety protection system with warning alarms; low fluid level and dry-running, over-temperature, over-current Splash-proof keypad and keypad lock function prevents accidental changes during operation

Supplied in the United Kingdom by Lancetech Limited. Lead time 2-3 weeks.