Photometric tube tests

Photometric tube tests are pre-dosed reagent tubes that give a quantitative reading in a photometer. Wastewater plants, drinking water laboratories and industrial effluent teams use them for routine water analysis of nutrients, metals and sum parameters.

The 203 Macherey-Nagel listings are NANOCOLOR tests and reagents. Examples include the aluminium standard test for 0.01 to 1.00 mg/L Al3+ sufficient for 250 determinations, the ammonium standard test for 0.01 to 2.0 mg/L NH4-N for 100 determinations, an AOX expansion kit for the sensitive AOX range and a chloride detection kit for AOX determinations in samples with high chloride content.

Choose a tube test by parameter and measuring range, then check the number of determinations per pack against your sampling schedule. Pair these tests with NANOCOLOR photometers and accessories from the neighbouring section. Ask Lancetech Limited for a quotation on the parameters you test most often.

Filters (2 active)

FiltersReset all

Photometric tube tests

Storage Temperature

Hazardous material

Shelf life (from production)

Parameter

For method

NANOCONTROL Interlaboratory test consisting of interlaboratory test solution A and interlaboratory test solution B for the determination of COD, NO3-N, NH4-N and total-P

NANOCONTROL Interlaboratory trial metals consisting of interlaboratory test solution A, B and C for the determination of Al, Cd, Cr, Cu, Fe, Ni, Pb and Zn

NANOCONTROL Multistandard Sewage Outflow 2 for analytical control of low concentrations

NANOCONTROL Multistandard Sewage Outflow 1 for analytical control of low concentrations

NANOCONTROL Multistandard "Sewage inflow" for analytical control of medium concentrations

NANOCONTROL Multistandard "Seepage" for analytical control of high concentrations

NANOCONTROL Multistandard "Metals 1" for analytical control

NANOCONTROL Multistandard "Metals 2" for analytical control

NANOCONTROL Multistandard "Drinking water" for analytical control

NANOCONTROL Standard AOX 2x5 mL standard solution sufficient for 20 determinations

NANOCONTROL Standard Chlorine 2x30 mL standard solution and additional reagents sufficient for 30 determinations

NANOCONTROL Standard COD 60 30 mL standard solution in glass bottle, sufficient for 15 determinations

NANOCONTROL Standard Chromate 2x30 mL standard solution/ 30 mL standard addition 100+ sufficient for 15 determinations

NANOCONTROL Standard COD 160 30 mL standard solution in glass bottle sufficient for 15 determinations

NANOCONTROL Standard COD 15000 30 mL standard solution in glass bottle sufficient for min. 30 determinations

NANOCONTROL Standard COD 1500 30 mL standard solution in glass bottle sufficient for 15 determinations

NANOCONTROL Standard Sulfat LR 200 65 mL standard solution in glass bottle, sufficient for 15 determinations

NANOCONTROL Standard Nitrite 2x30 mL standard solution/ 30 mL standard addition 100+ sufficient for 15 determinations

NANOCONTROL NANOTURB turbidity standard with 4 tubes (1.4,100.400 NTU) for the nephelometric turbidity calibration of NANOCOLOR spectrophtometers

NANOCONTROL NANOCHECK 2.0 test standards to check the photometric accuracy

NANOCONTROL Standard TOC 30 30 mL standard solution in glass bottle, sufficient for 15 determinations

NANOCONTROL Standard ortho-Phosphate 2x30 mL standard solution/ 30 mL standard addition 100+ sufficient for 15 determinations

NANOCONTROL Standard TOC 300 30 mL standard solution in glass bottle, sufficient for 15 determinations

NANOCOLOR Standard BOD5 10 tubes with standard (lyophilised) sufficient for 10 determinations

New products and price changes, once a month