Photometric tube tests
Photometric tube tests are pre-dosed reagent tubes that give a quantitative reading in a photometer. Wastewater plants, drinking water laboratories and industrial effluent teams use them for routine water analysis of nutrients, metals and sum parameters.
The 203 Macherey-Nagel listings are NANOCOLOR tests and reagents. Examples include the aluminium standard test for 0.01 to 1.00 mg/L Al3+ sufficient for 250 determinations, the ammonium standard test for 0.01 to 2.0 mg/L NH4-N for 100 determinations, an AOX expansion kit for the sensitive AOX range and a chloride detection kit for AOX determinations in samples with high chloride content.
Choose a tube test by parameter and measuring range, then check the number of determinations per pack against your sampling schedule. Pair these tests with NANOCOLOR photometers and accessories from the neighbouring section. Ask Lancetech Limited for a quotation on the parameters you test most often.
Filters (3 active)
Method
Iron - Triazine1Chlorine - DPD1Detergents - Methylene blue1Detergents - Bromophenol blue1Iron - 1,10–Phenanthroline1Silica - Silicomolybdenum blue1Manganese - Formaldoxime1Phenols - 4 -Nitroaniline1Phosphate - Phosphomolybdenum blue1Phosphate - Vanadate molybdate1Sulfide - Methylene blue1Scope of delivery
Rugged box with reagents for 250 tests.6Rugged box with reagents for 500 tests.3Rugged box with reagents for 40 tests.1Rugged box with reagents for 100 tests.1Gross weight (incl. packaging)
497.6 g / 1.1 lbs1255.2 g / 0.56 lbs13970 g / 8.75 lbs13750 g / 8.27 lbs1463.3 g / 1.02 lbs1436 g / 0.96 lbs1421 g / 0.93 lbs1605.7 g / 1.33 lbs1625 g / 1.38 lbs1619.5 g / 1.36 lbs1369.5 g / 0.81 lbs1
