Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (3 active)
Container
Pack size
Shelf life
Matrix / solvent

27 components: B 40 mg/l ; Be 40 mg/l ; Cd 40 mg/l ; Se 40 mg/l ; Tl 40 mg/l ; Li 40 mg/l ; Ti 40 mg/l ;… – CRM, 100 ml

ICP-MS Tuning Solution - Tune B ICAP - 7 components – CRM, 100 ml

ICP-MS tuning solution B ICAP - 7 components – CRM, 500 ml

Tuning Solution for ICP-MS - 9 components – CRM, 100 ml

Tuning Solution for ICP-MS 6 components: 1 µg/l each of Li ; Mg ; Y ; Ce ; Tl ; Co in HNO3 2% – CRM, 100 ml

Tuning Solution for ICP-MS 6 components: 1 µg/l each of Li ; Mg ; Y ; Ce ; Tl ; Co in HNO3 2% – CRM, 500 ml

PA Tuning Solution 1 - 26 components – CRM, 100 ml

ICP-MS Stock Tuning Solution- 5 components: 10 mg/l each of Li ; Y ; Ce ; Co ; Tl in HNO3 2% – CRM, 100 ml

ICP-MS tuning solution- 6 components: 10 µg/ml each of Li ; Mg ; Y ; Ce ; Tl ; Co in HNO3 2% – CRM, 100 ml

ICP-MS Internal Standard 2 - 8 components: 10 mg/l each of Bi ; Ho ; In ; 6Li ; Sc ; Tb ; Y ; Rh in HNO3 2% – CRM, 100 ml

Trace Metals in Drinking Water Standard - 29 components – CRM, 100 ml

Trace Metals in Drinking Water Standard - 29 components – CRM, 250 ml

Trace Metals in Drinking Water Standard - 29 components – CRM, 500 ml

Ca 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

K 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Li 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Mg 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Na 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Ag 1000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Al 1000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

As 1000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Ba 1000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Be 1000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml
