Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (3 active)
Pack size
Shelf life
Product type
Matrix / solvent
Concentration

ICP-MS Refractory Elements Standard - 12 components – CRM, 100 ml

ICP-MS Calibration Standard (XXI) - 29 components – CRM, 100 ml (109498.L1)


Standard Solution 7 components: 10 µg/ml each of 6Li ; Sc ; Ge ; Y ; In ; Tb ; Bi in HNO3 5% – CRM, 100 ml

Initial Calibration Verification Standard - 26 components – CRM, 100 ml

Environmental Calibration Standard 25 components – CRM, 100 ml

PA Tuning Solution 2 - 8 components – CRM, 100 ml

ICP-MS Alternate Internal Standard 2 - 8 components – CRM, 100 ml

6020 Interference Check Solution A for ICP-MS systems - 12 components – CRM, 100 ml

6020 Interference Check Solution B for ICP-MS - 11 components – CRM, 100 ml

Multi-element calibration standard- 2A for ICP-MS - 28 components – CRM, 100 ml

ICP-MS Precious Metals Standard - 8 components – CRM, 100 ml

21 components: 100 µg/ml each of Al ; Ag ; As ; Ba ; Be ; Cd ; Co ; Cr ; Cu ; Fe ; K ; Mn ; Mo ; Ni ; Pb… – CRM, 100 ml

Bi 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Cd 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Co 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Cr 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Cu 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Fe 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Mn 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml

Sb 10000 mg/l in diluted HNO3/ HF for ICP/MS – CRM, 100 ml

Sn 10000 mg/l in diluted HNO3/ HF for ICP/MS – CRM, 100 ml

Zn 10000 mg/l in diluted HNO3 for ICP/MS – CRM, 100 ml
