Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (3 active)

ICP-MS Refractory Elements Standard - 12 components – CRM, 100 ml

ICP Multi-element Standard - 26 components – CRM, 100 ml

ICP Multi-element Standard - 26 components – CRM, 250 ml

ICP Multi-element Standard - 26 components – CRM, 500 ml

EPA 200.7 - Laboratory Performance Check Standard - 29 components – CRM, 100 ml

Calibration Standard Trace Metals (XIII) - 15 components – CRM, 100 ml

ICP multi-element standard solution VI 30 components – CRM, 100 ml

lambda-Cyhalothrin 10 µg/ml in Cyclohexane – CRM, 10 ml (1125000)

4,4 prime-DDT 10 µg/ml in Cyclohexane – CRM, 10 ml (1125700)

Alpha-HCH (alpha-Hexachlorocyclohexane) 10 µg/ml in Cyclohexane – CRM, 10 ml (1128300)

23 components: 100 mg/l each of Al ; Sb ; Ba ; Pb ; B ; Ca ; Cd ; Cr ; Co ; Fe ; K ; Cu ; Li ; Mg ; Mn ;… – CRM, 100 ml

Calibration Mix Majors 5 components: 500 mg/l each of Ca ; Fe ; K ; Mg ; Na in HNO3 5% – CRM, 100 ml

Calibration Mix Majors 5 components: 500 mg/l each of Ca ; Fe ; K ; Mg ; Na in HNO3 5% – CRM, 500 ml

EPA 6010 - Laboratory Performance Check Standard - 30 components – CRM, 100 ml

ICP Multi-element standard - 33 components – CRM, 100 ml

ISO 22032 Multi-component Stock Solution 6 components – CRM, 1 ml

ICP-MS Precious Metals Standard - 8 components – CRM, 100 ml

Water 5% HCl for ICP, AAS and UV-VIS – reference solution, 1000 ml

Water 5% HCl for ICP, AAS and UV-VIS – reference solution, 100 ml

Water 5% HCl for ICP, AAS and UV-VIS – reference solution, 500 ml

Water 5% HNO3 for ICP, AAS and UV-VIS – reference solution, 1000 ml

Water 5% HNO3 for ICP, AAS and UV-VIS – reference solution, 100 ml

