Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (2 active)

Method DM 471 Standard Mixture 10 - 7 components – CRM, 1 ml

Non-Halogenated Volatiles Mix - 7 components – CRM, 1 ml


PCB Calibration mixture (acc. Guideline for Waste Fuels 2007/0697/A) 7 components – CRM, 1 ml

PCB Calibration mixture (acc. Guideline for Waste Fuels 2007/0697/A) 7 components – CRM, 10 ml

Ultrashort-chain-PFAS Mixture (C1-C4) - 7 components – CRM, 1 ml

ASTM Method D5580 Aromatics Quantitative Calibration Mixture with IS (set of 10x1 ml) : 7 components – CRM, 10 ml

ASTM Method D5580 Aromatics Quantitative Calibration Mixture with IS: 7 components – CRM, 1 ml

Standard for Semi-quantitative Method - 7 components – CRM, 100 ml

Quality Control Standard - 7 components – CRM, 100 ml

Quality Control Standard, 7A Elements; K 1000 mg/l ; Ag 50 mg/l ; Al 100 mg/l ; B 100 mg/l ; Ba 100 mg/l… – CRM, 100 ml

Internal Standard Mix - 7 components: 10 µg/ml each of 6Li ; Sc ; Ge ; Y ; In ; Tb ; Bi in HNO3 5% – CRM, 100 ml

Internal Standard Mix - 7 components: 10 µg/ml each of 6Li ; Sc ; Ge ; Y ; In ; Tb ; Bi in HNO3 5% – CRM, 500 ml

Multi-Element Internal Standard 7 components – CRM, 100 ml



Combined Seven Anion Standard II - 7 components – CRM, 100 ml


Mixed Anions Standard - 7 components – CRM, 100 ml (REAIC1020.L1)

Mixed Anions Standard - 7 components – CRM, 100 ml (REAIC1026.L1)
