Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (3 active)

MISA Standard 2 - Precious Metals - 6 components: 100 mg/l each of Au ; Ir ; Pd ; Pt ; Rh ; Ru in HCl 10% – CRM, 100 ml

ICP internal standard - 6 components: 100 mg/l each of Bi ; In ; 6Li ; Sc ; Tb ; Y in HNO3 5% – CRM, 100 ml

ISO 22032 Multi-component Stock Solution 6 components – CRM, 1 ml

PAH Standard Solution 6 components – CRM, 5 ml (F109250)

PAH Standard Solution 6 components – CRM, 1 ml (F109250.1)

PAH Standard Solution 6 components – CRM, 5 ml (F109260)

n-Alkane Standard Solution 6 components – CRM, 5 ml

ASTM Method D5580 Valve Timing Calibration Mixture (set of 5x1 ml): 6 components – CRM, 5 ml

PAH Standard Solution 6 components – CRM, 1 ml (F112191)

VOC Gas Mixture - 6 components according to EPA Method 502 ; 2000 µg/ml each of Bromomethane ;… – CRM, 1 ml


PCBs Standard Solution 6 components – CRM, 10 ml

BTEX Standard Solution - 6 components – CRM, 1 ml (F129231)

EN 16694: Multicomponent stock solution 6 components – CRM, 1 ml

6 components: 1000 mg/l each of Diisodecyl phthalate (mixture of isomers) ; Phthalic acid, bis-iso-nonyl… – CRM, 1 ml

6 components: 10000 mg/l each of Ethylbenzene ; Toluene ; m-Xylene ; o-Xylene ; p-Xylene ; Benzene in Methanol – CRM, 1 ml

6 components: 2 g/l each of n-Pentane ; n-Hexane ; n-Heptane ; n-Octane ; n-Nonane ; n-Decane in Methanol – CRM, 1 ml

6 components: 10 µg/ml each of 2,4'-DDE ; 2,4'-DDT ; 2,4'-DDD ; 4,4'-DDE ; 4,4'-DDT ; 4,4'-DDD (TDE) in… – CRM, 1 ml

6 components: 10 µg/ml each of BDE 28 ; BDE 47 ; BDE 99 ; BDE 100 ; BDE 153 ; BDE 154 in Iso-octane – CRM, 1 ml

6 components: 2000 µg/ml each of Phthalic acid,bis-2-ethylhexylester ; Phthalic acid, bis-methyl ester ;… – CRM, 1 ml

6 components: 1000 mg/l each of Fentin-chloride ; TBTC ; Diphenyltin dichloride ; Phenyltin-trichloride… – CRM, 1 ml

BTEX Standard Solution - 6 components – CRM, 1 ml (F263287)

6 components: 200 mg/l each of Ethylbenzene ; Toluene ; m-Xylene ; o-Xylene ; p-Xylene ; Benzene in Methanol – CRM, 1 ml
