Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (2 active)
Dangerous goods

4 components: 100 µg/ml each of Triflusulfuron-methyl ; Nicosulfuron ; Rimsulfuron ; Triasulfuron in… – CRM, 1 ml

4 components: 100 µg/ml each of Benzo(a)pyrene D12 ; Phenanthrene D10 ; Acenaphthene D10 ;… – CRM, 1 ml

4 components: 100 µg/ml each of 2,4'-DDT ; 4,4'-DDT ; 4,4'-DDD (TDE) ; 4,4'-DDE in Acetone – CRM, 1 ml

4 components: 100 µg/ml each of Thiamethoxam ; Thiacloprid ; Acetamiprid ; Imidacloprid in Acetonitrile – CRM, 1 ml

EU Regulation 2023/915 – PAH4 Calibration Standard 4 components – CRM, 1 ml

EU Water Watch List 2025/439 – Sunscreen Agents Standard 4 components – CRM, 1 ml

EN 14039/ISO 16703 Hydrocarbon Standard - 4 components – CRM, 1 ml


Internal Standard Mixture (Method 8260) - 4 components – CRM, 1 ml

Fuel Oil Degradation/Retention Time Mix C17-C20 (ASTM D2887-06a) 4 components – CRM, 1 ml

EU 2023/915 Food Testing PFAS Mixture - 4 components – CRM, 1 ml

PFAS Mixture - 4 components: N-Methylperfluorooctanesulfonamidoethanol 10 µg/ml ;… – CRM, 1 ml

Surrogate Standard Mixture - 4 components – CRM, 1 ml

Standard for determination of 4 main elements - 5000 mg/l each of Ca ; K ; Mg ; Na in HNO3 5% – CRM, 100 ml

Standard for determination of 4 main elements - 5000 mg/l each of Ca ; K ; Mg ; Na in HNO3 5% – CRM, 500 ml

ICP-MS Standard 4 components: 1000 mg/l each of Ca ; Mg ; K ; Na in HNO3 2% – CRM, 100 ml

ICP-MS Standard 4 components: 1000 mg/l each of Ca ; Mg ; K ; Na in HNO3 2% – CRM, 500 ml

Alternate Metals II - 4 components: Ca 500 mg/l ; Na 500 mg/l ; K 100 mg/l ; Mg 100 mg/l in HNO3 2% – CRM, 100 ml

Instrument Calibration Standard 1 - 4 components: 5000 mg/l each of Ca ; K ; Mg ; Na in HNO3 5% – CRM, 100 ml

Instrument Calibration Standard 1 - 4 components: 5000 mg/l each of Ca ; K ; Mg ; Na in HNO3 5% – CRM, 500 ml

Primary Interferents/ Interferents A - 4 components – CRM, 100 ml

Alternate Metals II - 4 components: Ca 500 mg/l ; Na 500 mg/l ; K 100 mg/l ; Mg 100 mg/l in HNO3 2% – CRM, 500 ml

Environmental Standards - 4 components: 1000 mg/l each of Ca ; K ; Mg ; Na in HNO3 5% – CRM, 100 ml
