Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (3 active)

Quality Control Standard of Mineral Oils (ISO 9377-2-Mod) 2 components – CRM, 5 ml (F109641)

Florisil Cartridge QC Standard Mixture (ISO 9377-2-Mod) 2 components – CRM, 5 ml

Quality Control Standard of Mineral Oils (ISO 9377-2-Mod) 2 components – CRM, 5 ml (F109661)

Quality Control Standard of Mineral Oils (ISO 9377-2-Mod) 2 components – CRM, 5 ml (F109671)

Quality Control Standard of Mineral Oils (ISO 9377-2-Mod) 2 components – CRM, 10 ml

Extraction Solvent Stock Solution (ISO 9377-2-Mod) n-Decane 20ul/l; n-Tetracontane 20 mg/l in n-Hexane – CRM, 10 ml

Extraction Solvent Stock Solution (ISO 9377-2-Mod) 2 components – CRM, 10 ml

Extraction Solvent Stock Solution (ISO 9377-2-Mod) 2 components – CRM, 5 ml

Standard Solution 2 components (ASTM D5580-02) 2000 µg/ml each of 2-Bromo-1-chloropropane ;… – CRM, 1 ml

Phenols Surrogate Standard Mixture (EPA 8041) - 2 components – CRM, 1 ml

Surrogate Standard Solution - 2 components – CRM, 1 ml

Internal & Surrogate Solution 2 components – CRM, 1 ml

Quality Control Standard of Mineral Oils (ISO 9377-2-Mod) 2 components – CRM, 5 ml (F145091)

Drinking Water Odor Standard - 2 components: 100 mg/l each of (±)-Geosmin ; 2-Methylisoborneol in Methanol – CRM, 1 ml

2 components: 100 µg/ml each of Metribuzin ; Metamitron in Acetonitrile – CRM, 1 ml

2 components: 100 mg/l each of Ametoctradin ; Fenbutatin-oxide in Acetone – CRM, 1 ml

2 components: 100 mg/l each of Hexachlorobenzene ; Pentachlorobenzene in Toluene – CRM, 1 ml

2 components: 100 µg/ml each of Cyromazine ; Pymetrozine in Acetonitrile – CRM, 1 ml

2 components: 100 µg/ml each of Nicosulfuron ; Metamitron in Acetone – CRM, 1 ml

2 components: 100 µg/ml each of Simazine ; Atrazine in Acetone – CRM, 1 ml

2 components: 100 µg/ml each of Spirodiclofen ; Spiromesifen in Acetonitrile – CRM, 1 ml

2 components: 100 µg/ml each of Metribuzin ; Etrimfos in Acetone – CRM, 1 ml

2 components: 50000 mg/l each of Mineral Oil ; Diesel Oil in n-Hexane – CRM, 1 ml
