Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (3 active)

Boron B - 100 mg/l in H2O for ICP-MS ((NH4)2B4O7 99.999%) – CRM, 100 ml


Phosphorus P -100 mg/l in H2O for ICP-MS (NH4H2PO4 99.999%) – CRM, 100 ml

Sulphur S - 100 mg/l in H2O for ICP-MS ((NH4)2SO4 99.999%) – CRM, 100 ml

Silicon Si - 100 mg/l in H2O for ICP-MS ((NH4)2SiF6 99.999%) – CRM, 100 ml

Tungsten W - 100 mg/l in 0.05% NH3 for ICP-MS (WO3 99.999%) – CRM, 100 ml

Boron B - 10 mg/l in H2O for ICP-MS ((NH4)2B4O7 99.999%) – CRM, 100 ml


Phosphorus P -10 mg/l in H2O for ICP-MS (NH4H2PO4 99.999%) – CRM, 100 ml

Sulphur S - 10 mg/l in H2O for ICP-MS ((NH4)2SO4 99.999%) – CRM, 100 ml

Silicon Si - 10 mg/l in H2O for ICP-MS ((NH4)2SiF6 99.999%) – CRM, 100 ml

Tungsten W - 10 mg/l in 0.05% NH3 for ICP-MS (WO3 99.999%) – CRM, 100 ml
