Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (2 active)

Quality Control Standard 2R - 7 components – CRM, 100 ml

32 components: 100 mg/l each of Ag ; Al ; Ba ; Bi ; Ca ; Cd ; Co ; Cr ; Cu ; Fe ; Ga ; Ge ; In ; K ; Li… – CRM, 100 ml

32 components: 100 mg/l each of Ag ; Al ; Ba ; Bi ; Ca ; Cd ; Co ; Cr ; Cu ; Fe ; Ga ; Ge ; In ; K ; Li… – CRM, 500 ml

Calibration Standard Trace Metals (XIII) - 15 components – CRM, 100 ml

Standard Solution 7 components: Cd 10 mg/l ; Cr 900 mg/l ; Cu 800 mg/l ; Ni 200 mg/l ; Pb 900 mg/l ; Zn… – CRM, 100 ml

Multi-element solution X - 23 components – CRM, 100 ml

ICP Multi-element standard solution IX - 9 components – CRM, 100 ml

ICP-MS Calibration Standard (XXI) - 29 components – CRM, 100 ml (109498.L1)

GF AAS Multi element standard XVIII - 16 components – CRM, 100 ml

ICP multi-element standard solution VI 30 components – CRM, 100 ml

ICP Calibration Standard (I) - 19 components – CRM, 100 ml


Standard Solution 4 components: Al 5000 mg/l ; Ca 5000 mg/l ; Mg 5000 mg/l ; Fe 2000 mg/l in HNO3 5% – CRM, 100 ml

Standard Solution 7 components: 10 µg/ml each of 6Li ; Sc ; Ge ; Y ; In ; Tb ; Bi in HNO3 5% – CRM, 100 ml

Initial Calibration Verification Standard - 26 components – CRM, 100 ml

6020 Interference Check Solution B for ICP-MS - 11 components – CRM, 100 ml

ICP-OES Wavelength Calibration Solution Concentrate 15 components – CRM, 100 ml

ICP-OES Wavelength Calibration Solution Concentrate 15 components – CRM, 500 ml

ICP-OES Wavelength calibration solution 15 components – CRM, 100 ml (6610030100.L1)

ICP-OES Wavelength calibration solution 15 components – CRM, 500 ml (6610030100.L5)

ICP internal standard - 6 components: 100 mg/l each of Bi ; In ; 6Li ; Sc ; Tb ; Y in HNO3 5% – CRM, 100 ml

Calibration mix 2 for AA and ICP-OES - 18 components – CRM, 100 ml

Calibration Mix Majors 5 components: 500 mg/l each of Ca ; Fe ; K ; Mg ; Na in HNO3 5% – CRM, 100 ml
