Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (2 active)

ICP-MS tuning solution- 6 components: 10 µg/ml each of Li ; Mg ; Y ; Ce ; Tl ; Co in HNO3 2% – CRM, 100 ml

QCSTD - 27 Quality Control Standard 27 components – CRM, 100 ml (5190-9418.L1)

Draft CCL 6 – Inorganic Elements Calibration Standard 9 components – CRM, 100 ml

Quality Control Standard - 25 components – CRM, 100 ml

ICP-OES Wavelength Calibration Solution Concentrate 15 components – CRM, 100 ml

ICP-OES Wavelength Calibration Solution Concentrate 15 components – CRM, 500 ml

ICP-OES Wavelength calibration solution 15 components – CRM, 100 ml (6610030100.L1)

ICP-OES Wavelength calibration solution 15 components – CRM, 500 ml (6610030100.L5)

ICP internal standard - 6 components: 100 mg/l each of Bi ; In ; 6Li ; Sc ; Tb ; Y in HNO3 5% – CRM, 100 ml

Calibration mix 1 for AA and ICP-OES - 4 components: 100 mg/l each of Mo ; Sb ; Sn ; Ti in HNO3 2% ; HF 0.5% – CRM, 100 ml

Calibration mix 2 for AA and ICP-OES - 18 components – CRM, 100 ml

Calibration Mix Majors 5 components: 500 mg/l each of Ca ; Fe ; K ; Mg ; Na in HNO3 5% – CRM, 100 ml

Calibration Mix Majors 5 components: 500 mg/l each of Ca ; Fe ; K ; Mg ; Na in HNO3 5% – CRM, 500 ml

MISA Standard 1 - Rare Earth Metals - 18 components – CRM, 100 ml

ICP-MS Internal Standard 2 - 8 components: 10 mg/l each of Bi ; Ho ; In ; 6Li ; Sc ; Tb ; Y ; Rh in HNO3 2% – CRM, 100 ml

EPA 6010 - Laboratory Performance Check Standard - 30 components – CRM, 100 ml

Multi-element calibration standard- 2A for ICP-MS - 28 components – CRM, 100 ml

Multi-element calibration standard - 4B - 12 components – CRM, 100 ml

Multi-element calibration standard-1: 17 components – CRM, 100 ml

Multi-element calibration standard-1: 17 components – CRM, 500 ml

Multi-element calibration standard-3: 10 components – CRM, 100 ml

Spiking Standard 2R - 4 components: 10000 mg/l each of Ca ; Mg ; K ; Na in HNO3 2% – CRM, 100 ml

ICP Calibration Standard 4 components: 1000 mg/l each of Ca ; Mg ; K ; Na in HNO3 2% – CRM, 100 ml
