Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (3 active)

Quality Control Standard 2R - 7 components – CRM, 100 ml

32 components: 100 mg/l each of Ag ; Al ; Ba ; Bi ; Ca ; Cd ; Co ; Cr ; Cu ; Fe ; Ga ; Ge ; In ; K ; Li… – CRM, 100 ml

32 components: 100 mg/l each of Ag ; Al ; Ba ; Bi ; Ca ; Cd ; Co ; Cr ; Cu ; Fe ; Ga ; Ge ; In ; K ; Li… – CRM, 500 ml

ICP Multi-element Standard - 26 components – CRM, 100 ml

ICP Multi-element Standard - 26 components – CRM, 250 ml

ICP Multi-element Standard - 26 components – CRM, 500 ml

EPA 200.7 - Laboratory Performance Check Standard - 29 components – CRM, 100 ml

ICP Tuning Standard (XXIV) 15 components – CRM, 100 ml

ICP Tuning Standard (XXIV) 15 components – CRM, 500 ml

Calibration Standard Trace Metals (XIII) - 15 components – CRM, 100 ml

ICP Multi-Element Standard Solution XV - 8 components – CRM, 100 ml

ICP Calibration Standard - Quality Control (XVI) 21 components – CRM, 100 ml

Standard Solution 7 components: Cd 10 mg/l ; Cr 900 mg/l ; Cu 800 mg/l ; Ni 200 mg/l ; Pb 900 mg/l ; Zn… – CRM, 100 ml

ICP multi-element standard solution VIII 24 components – CRM, 100 ml

Multi-element solution X - 23 components – CRM, 100 ml

ICP Multi-element standard solution IX - 9 components – CRM, 100 ml

ICP Calibration Standard HCl Soluble Elements (XVII) 7 components – CRM, 100 ml

ICP multi-element standard solution VI 30 components – CRM, 100 ml

ICP Calibration Standard (IV) 23 components – CRM, 100 ml

ICP Calibration Standard (I) - 19 components – CRM, 100 ml

Standard Solution 4 components: Al 5000 mg/l ; Ca 5000 mg/l ; Mg 5000 mg/l ; Fe 2000 mg/l in HNO3 5% – CRM, 100 ml

QCSTD - 27 Quality Control Standard 27 components – CRM, 100 ml (190065000.L1)

ICP Calibration Standard - 10 components – CRM, 100 ml
