Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (3 active)

Potassium K - 1 g/l in HCl 2%; C2H5OH 12% – CRM, 100 ml

Potassium K - 1 g/l in HCl 2%; C2H5OH 12% – CRM, 500 ml

Sodium Na - 1 g/l in 2% HCl; 12% C2H5OH – CRM, 100 ml

Sodium Na - 1 g/l in 2% HCl; 12% C2H5OH – CRM, 500 ml

Residual solvents (0861): Class 3 acc. to Ph Ch MIX A: 25 components – CRM, 1 ml

Residual solvents (0861): Class 3/MixB - 2 components – CRM, 1 ml

Conductivity Standard 10 uS/cm at 25 C in 30% n-propanol – CRM, 500 ml

Conductivity Standard 15 uS/cm at 25 C in 30% n-propanol – CRM, 500 ml

Conductivity Standard 5 uS/cm at 25 C in 30% n-propanol – CRM, 500 ml

Sulphur in Diesel Oil, Calibration Kit: 3 mg/kg, 5 mg/kg, 10 mg/kg; + Blank (each solution in 1x10ml) – CRM, 40 ml

Sulphur in Diesel Oil, Calibration Kit: 10 mg/kg, 30 mg/kg, 50 mg/kg; + Blank (each solution in 1x10ml) – CRM, 40 ml

Density Standard 25 °C, (Nominal density value 0.979 g/ml at 25 °C) – CRM, 100 ml

Density Standard 20 °C, (Nominal density value 0.981 g/ml at 20 °C) – CRM, 100 ml

Density Standard 15 °C, (Nominal density value 0.982 g/ml at 15 °C) – CRM, 100 ml

5 components: 1 µg/ml each of Furfuryl alcohol ; 2-Acetylfuran ; Furaldehyde ; 5-(Hydroxymethyl)furfural… – CRM, 1 ml

PFOS/PFOA Reference Standard - 2 components – CRM, 1 ml

ASTM Method D5769 Quality Control Reference Material without IS (set of 10x2 ml): 14 components – CRM, 20 ml

Kit of ethanolic solutions 9%; 11.50%; 14% – CRM, 300 ml

Kit of ethanolic solutions 5%, 9%; 11.50%; 14% – CRM, 400 ml

Karl Fischer coulometric Water Standard 0.1% (1 g contains 1.0 mg H2O) – CRM, 40 g

Karl Fischer coulometric Water Standard 0.1% (1 g contains 1.0 mg H2O) – CRM, 80 g

Karl Fischer coulometric Water Standard 1% (1g contains 10mg H2O) – CRM, 40 g

Karl Fischer coulometric Water Standard 1% (1g contains 10mg H2O) – CRM, 80 g
