Certified Reference Standards
Certified Reference Standards are the materials analytical laboratories use to calibrate instruments, validate methods and check results. This section gathers the reference standards used by pharmaceutical QC, environmental testing, food and water laboratories across the UK.
The range is led by European Pharmacopoeia (EP) reference standards and TOKU-E primary reference standards such as Actinomycin D in 5 mg, 10 mg and 25 mg packs. Alongside these sit Apera Instruments turbidity standard sets (20, 100, 400 and 800 NTU) for TN400 and TN480 meters, with further sections for pH buffers, conductivity and redox standards, AAS and ICP standards, titration and volumetric solutions, and TOC and TIC standards.
When choosing a reference standard, start from the method: a pharmacopoeia monograph calls for the matching EP standard, while instrument calibration needs a standard matched to the parameter, concentration range and sample matrix. If the exact material is not listed, Lancetech Limited can quote it on request.
Filters (2 active)

GENESIS Calibration Standard - 22 components – CRM, 100 ml

MISA Standard 2 - Precious Metals - 6 components: 100 mg/l each of Au ; Ir ; Pd ; Pt ; Rh ; Ru in HCl 10% – CRM, 100 ml


Standard Solution 7 components: 10 µg/ml each of 6Li ; Sc ; Ge ; Y ; In ; Tb ; Bi in HNO3 5% – CRM, 100 ml

Initial Calibration Verification Standard - 26 components – CRM, 100 ml

Environmental Calibration Standard 25 components – CRM, 100 ml

Tuning Solution for ICP-MS 6 components: 1 µg/l each of Li ; Mg ; Y ; Ce ; Tl ; Co in HNO3 2% – CRM, 100 ml

Tuning Solution for ICP-MS 6 components: 1 µg/l each of Li ; Mg ; Y ; Ce ; Tl ; Co in HNO3 2% – CRM, 500 ml

PA Tuning Solution 1 - 26 components – CRM, 100 ml

PA Tuning Solution 2 - 8 components – CRM, 100 ml

ICP-MS Alternate Internal Standard 2 - 8 components – CRM, 100 ml

6020 Interference Check Solution A for ICP-MS systems - 12 components – CRM, 100 ml

6020 Interference Check Solution B for ICP-MS - 11 components – CRM, 100 ml

ICP-MS Stock Tuning Solution- 5 components: 10 mg/l each of Li ; Y ; Ce ; Co ; Tl in HNO3 2% – CRM, 100 ml

ICP-MS tuning solution- 6 components: 10 µg/ml each of Li ; Mg ; Y ; Ce ; Tl ; Co in HNO3 2% – CRM, 100 ml

QCSTD - 27 Quality Control Standard 27 components – CRM, 100 ml (5190-9418.L1)



Quality Control Standard - 25 components – CRM, 100 ml

ICP-OES Wavelength Calibration Solution Concentrate 15 components – CRM, 100 ml

ICP-OES Wavelength Calibration Solution Concentrate 15 components – CRM, 500 ml

ICP-OES Wavelength calibration solution 15 components – CRM, 100 ml (6610030100.L1)

ICP-OES Wavelength calibration solution 15 components – CRM, 500 ml (6610030100.L5)
