Anion & Cation
Anion & Cation is the section for element and ion standards used in atomic absorption, ICP, ICP-MS, ion chromatography and flame photometry. Trace metal laboratories, water utilities, pharmaceutical elemental impurity teams and clinical chemistry laboratories find their calibration standards here.
The standards themselves are listed in the sub-categories, grouped by technique: atomic absorption single and multi element standards and releasing agents; ICP multi element calibration, tuning, interference and verification standards; ICP ICH Q3D standards split into oral, parenteral and inhalation classes; ICP single element standards; ion chromatography single and multi element anion and cation standards; flame photometry clinical, industrial and linearity standards with rinse solution; and high purity acids for trace analysis.
Pick the sub-category that matches your instrument first, then narrow by element, concentration and matrix. If the standard you need is not listed, Lancetech Limited can quote it on request.
Filters (2 active)
Reagecon Manganese Standard for Atomic Absorption (AAS) 1000 µg/mL (1000 ppm) in 2% Nitric Acid (HNO₃)
Reagecon Zinc Standard for Atomic Absorption (AAS) 5000 µg/mL (5000 ppm) in 2-5% Nitric Acid (HNO₃)
Reagecon ICP, ICP-MS Multi Element Standard (8 Elements) in 2-5% Nitric Acid (HNO₃)
Reagecon ICP, ICP-MS Multi Element Standard (9 Elements) in 2-5% Nitric Acid (HNO₃)
Reagecon Gadolinium Standard for ICP, ICP-MS 1000 µg/mL (1000 ppm) in 2-5% Nitric Acid (HNO₃)
Reagecon Gallium Standard for ICP, ICP-MS 1000 µg/mL (1000 ppm) in 2-5% Nitric Acid (HNO₃)
Reagecon Germanium Standard for ICP, ICP-MS 1000 µg/mL (1000 ppm) in 1% Hydrofluoric Acid (HF) and 5% Nitric Acid (HNO₃)
Reagecon Manganese Standard for ICP, ICP-MS 1000 µg/mL (1000 ppm) in 2-5% Nitric Acid (HNO₃)
Reagecon Neodymium Standard for ICP, ICP-MS 1000 µg/mL (1000 ppm) in 2-5% Nitric Acid (HNO₃)
Reagecon Nickel Standard for ICP, ICP-MS 1000 µg/mL (1000 ppm) in 2-5% Nitric Acid (HNO₃)
